H3C S5120-EI Series User Manual

1-5
Configuration
System clock displayed by the
display clock command
Example
If date-time is not in the daylight
saving time range, date-time is
displayed.
Configure: clock timezone zone-time add
1, clock summer-time ss one-off 1:00
2008/1/1 1:00 2008/8/8 2 and clock
datetime 1:30 2008/1/1
Display: 23:30:00 zone-time Mon
12/31/2007
[1], 2, 3 and 1 or
[1], 3, 2 and 1
date-time is in the daylight saving
time range:
If the value of
“date-time”-“summer-offset” is not in
the summer-time range,
“date-time”-“summer-offset” is
displayed;
If the value of
“date-time”-“summer-offset” is in the
summer-time range, date-time is
displayed.
Configure: clock timezone zone-time add
1, clock summer-time ss one-off 1:00
2008/1/1 1:00 2008/8/8 2 and clock
datetime 3:00 2008/1/1
Display: 03:00:00 ss Tue 01/01/2008
Enabling/Disabling the Display of Copyright Information
z With the display of copyright information enabled, the copyright information is displayed when a
user logs in through Telnet or SSH, or when a user quits user view after logging in to the device
through the console port, AUX port, or asynchronous serial interface. The copyright information will
not be displayed under other circumstances. The display format of copyright information is as
shown below:
****************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
z With the display of copyright information disabled, under no circumstances will the copyright
information be displayed.
Follow these steps to enable/disable the display of copyright information:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the display of copyright
information
copyright-info enable
Optional
Enabled by default.
Disable the display of copyright
information
undo copyright-info enable
Required
Enabled by default.

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English