2-4
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the port number of
the HTTPS service
ip https port port-number
Optional
By default, the port number of
the HTTPS service is 443.
If you execute the ip https port command for multiple times, the last configured port number is used.
Associating the HTTPS Service with an ACL
Associating the HTTPS service with an ACL can filter out requests from some clients to let pass only
clients that pass the ACL filtering.
Follow these steps to associate the HTTPS service with an ACL:
To do… Use the command… Remarks
Enter system view
system-view
—
Associate the HTTPS service
with an ACL
ip https acl acl-number
Required
Not associated by default.
Displaying and Maintaining HTTPS
To do… Use the command… Remarks
Display information about
HTTPS
display ip https
Available in any view
HTTPS Configuration Example
Network requirements
z Host acts as the HTTPS client and Device acts as the HTTPS server.
z Host accesses Device through Web to control Device.
z CA (Certificate Authority) issues certificate to Device. The common name of CA is new-ca.
In this configuration example, Windows Server serves as CA and you need to install Simple Certificate
Enrollment Protocol (SCEP) component.
To Next Page
Loading...
Need help?
General