H3C S5120-EI Series User Manual

7-2
To do… Use the command… Remarks
Specify source IP
address/interface for Telnet
packets
telnet client source { ip
ip-address | interface
interface-type
interface-number }
Optional
By default, no source IP
address/interface is specified.
z The IP address specified must be a local IP address.
z When specifying the source interface for Telnet packets, make sure the interface already exists.
z Before specifying the source IP address/interface for Telnet packets, make sure the route between
the interface and the Telnet server is reachable.
Displaying the source IP address/Interface Specified for Telnet
Packets
Follow these steps to display the source IP address/interface specified for Telnet packets:
To do… Use the command… Remarks
Display the source IP
address/interface specified for
Telnet packets
display telnet client configuration
Available in any view

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English