H3C S5120-EI Series - Configuring the Exception Handling Method; Device Management Configuration Task List; Device Management Overview

1-1
1 Device Management
When configuring device management, go to these sections for information you are interested in:
z Device Management Overview
z Device Management Configuration Task List
z Configuring the Exception Handling Method
z Rebooting a Device
z Configuring the Scheduled Automatic Execution Function
z Specifying a Boot File for the Next Device Boot
z Disabling Boot ROM Access
z Upgrading Boot ROM
z Configuring a Detection Interval
z Clearing the 16-bit Interface Indexes Not Used in the Current System
z Identifying and Diagnosing Pluggable Transceivers
z Displaying and Maintaining Device Management Configuration
z Device Management Configuration Examples
Device Management Overview
Through the device management function, you can view the current working state of a device, configure
running parameters, and perform daily device maintenance and management.
Device Management Configuration Task List
Complete these tasks to configure device management:
Task Remarks
Configuring the Exception Handling Method Optional
Rebooting a Device Optional
Configuring the Scheduled Automatic Execution Function Optional
Specifying a Boot File for the Next Device Boot Optional
Disabling Boot ROM Access Optional
Upgrading Boot ROM Optional
Configuring a Detection Interval Optional
Clearing the 16-bit Interface Indexes Not Used in the Current System Optional
Identifying and Diagnosing Pluggable Transceivers Optional
Configuring the Exception Handling Method
When the system detects any software abnormality, it handles the situation with one of the following two
methods: