2-15
<Sysname> copy newest.bin slot2#flash:/
# Specify newest.bin as the main startup file to be used at the next startup for all the member devices.
<Sysname> boot-loader file newest.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!
# Reboot the device and the startup file is updated at the system reboot.
<Sysname> reboot
The startup file used for the next startup must be saved under the root directory of the storage medium.
You can copy or move a file to the root directory of the storage medium. For the details of the
boot-loader command, refer to Device Management Commands in the System Volume.
Displaying and Maintaining FTP
To do… Use the command… Remarks
Display the configuration of the FTP
client
display ftp client configuration
Available in any view
Display the configuration of the FTP
server
display ftp-server
Available in any view
Display detailed information about
logged-in FTP users
display ftp-user
Available in any view
To Next Page
Loading...
Need help?
General