i
Table of Contents
1 RRPP Configuration··································································································································1-1
RRPP Overview ······································································································································1-1
Background ·····································································································································1-1
Basic Concepts in RRPP·················································································································1-2
RRPP Packets·································································································································1-4
Hello and Fail Timers·······················································································································1-4
How RRPP Works ···························································································································1-5
Typical RRPP Networking···············································································································1-6
Protocols and Standards···············································································································1-10
RRPP Configuration Task List ··············································································································1-10
Configuring Master Node······················································································································1-11
Configuring Transit Node ······················································································································1-12
Configuring Edge Node·························································································································1-14
Configuring Assistant Edge Node·········································································································1-15
Configuring Ring Group ························································································································1-16
Configuration Prerequisites···········································································································1-17
Configuring Ring Group·················································································································1-17
Displaying and Maintaining RRPP········································································································1-17
RRPP Typical Configuration Examples ································································································1-18
Configuring Single Ring Topology·································································································1-18
Configuring Single-Domain Intersecting Ring Topology ·······························································1-20
Configuring Intersecting-Ring Load Balancing··············································································1-25
Troubleshooting ····································································································································1-33
To Next Page
Loading...
