H3C S5120-EI Series User Manual

1-8
To do… Use the command… Remarks
Configure the holding time of
the traps in the queue
snmp-agent trap life seconds
Optional
120 seconds by default
z An extended linkUp/linkDown trap is the standard linkUp/linkDown trap (defined in RFC) appended
with interface description and interface type information. If the extended messages are not
supported on the NMS, disable this function to let the device send standard linkUp/linkDown traps.
z If the sending queue of traps is full, the system will automatically delete some oldest traps to
receive new traps.
z The system will automatically delete the traps whose lifetime expires.
Displaying and Maintaining SNMP
To do… Use the command… Remarks
Display SNMP-agent system
information, including the contact,
location, and version of the SNMP
display snmp-agent sys-info [ contact |
location | version ]*
Display SNMP agent statistics
display snmp-agent statistics
Display the SNMP agent engine
ID
display snmp-agent local-engineid
Display SNMP agent group
information
display snmp-agent group [ group-name ]
Display basic information of the
trap queue
display snmp-agent trap queue
Display the modules that can
send traps and whether their trap
sending is enabled or not
display snmp-agent trap-list
Display SNMP v3 agent user
information
display snmp-agent usm-user [ engineid
engineid | username user-name | group
group-name ] *
Display SNMP v1 or v2c agent
community information
display snmp-agent community [ read |
write ]
Display MIB view information for
an SNMP agent
display snmp-agent mib-view [ exclude |
include | viewname view-name ]
Available in
any view

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English