3-5
IP Routing Volume
Table 3-3 Features in the IP Routing volume
Features Description
IP Routing Overview
This document describes:
z Introduction to IP routing and routing table
z Routing protocol overview
Static Routing
A static route is manually configured by the administrator. The proper
configuration and usage of static routes can improve network
performance and ensure bandwidth for important network applications.
This document describes:
z Static route configuration
z Detecting Reachability of the Static Route’s Nexthop
IPv6 Static Routing
Static routes are special routes that are manually configured by network
administrators. Similar to IPv4 static routes, IPv6 static routes work well in
simple IPv6 network environments. This document describes:
z IPv6 static route configuration
IP Multicast Volume
Table 3-4 Features in Multicast volume
Features Description
Multicast Overview
This document describes the main concepts in multicast:
z Introduction to Multicast
z Multicast Models
z Multicast Architecture
z Multicast Packets Forwarding Mechanism
IGMP Snooping
Running at the data link layer, IGMP Snooping is a multicast control
mechanism on the Layer 2 Ethernet switch and it is used for multicast
group management and control. This document describes:
z Configuring Basic Functions of IGMP Snooping
z Configuring IGMP Snooping Port Functions
z Configuring IGMP Snooping Querier
z Configuring IGMP Snooping Policy
Multicast VLAN Multicast VLAN configuration
MLD Snooping
Multicast Listener Discovery Snooping (MLD Snooping) is an IPv6
multicast constraining mechanism that runs on Layer 2 devices to
manage and control IPv6 multicast groups. This document describes:
z Configuring Basic Functions of MLD Snooping
z Configuring MLD Snooping Port Functions
z Configuring MLD Snooping Querier
z Configuring MLD Snooping Policy
IPv6 Multicast VLAN IPv6 Multicast VLAN configuration
To Next Page
Loading...
Need help?
General