2-1
2 MIB Style Configuration
H3C private MIB involves two styles, H3C compatible MIB and H3C new MIB. In the H3C compatible
MIB style, the device sysOID is under the H3C’s enterprise ID 25506, and the private MIB is under the
enterprise ID 2011. In the H3C new MIB style, both the device sysOID and the private MIB are under the
H3C’s enterprise ID 25506. These two styles of MIBs implement the same management function except
for their root nodes. A device is shipped with MIB loaded and the MIB style may vary depending on the
device. To implement NMS’s flexible management of the device, the device allows you to configure MIB
style, that is, you can switch between the two styles of MIBs. However, you need to ensure that the MIB
style of the device is the same as that of the NMS.
Setting the MIB Style
Follow these steps to set the MIB style:
To do… Use the command… Remarks
Enter system view
system-view
—
Set the MIB style of the device mib-style [ new | compatible ]
Optional
new by default
The modified MIB style takes effect only after you reboot the device. Therefore, you are recommended
to reboot the device after setting the MIB style to ensure that the modification of the MIB style takes
effect.
Displaying and Maintaining MIB
To do… Use the command… Remarks
Display the MIB style
display mib-style
Available in any view
To Next Page
Loading...
Need help?
General