H3C S5120-EI Series - Page 978

1-11
# Enable SNMP logging on the agent to log the GET and SET operations of the NMS.
[Sysname] snmp-agent log get-operation
[Sysname] snmp-agent log set-operation
z The following log information is displayed on the terminal when the NMS performs the GET
operation to the agent.
%Jan 1 02:49:40:566 2006 Sysname SNMP/6/GET:
seqNO = <10> srcIP = <1.1.1.2> op = <get> node = <sysName(1.3.6.1.2.1.1.5.0)> value=<>
z The following log information is displayed on the terminal when the NMS performs the SET
operation to the agent.
%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:
seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus =<noError> node =
<sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>
Table 1-1 Description on the output field of SNMP log
Field Description
Jan 1 02:49:40:566 2006 The time when SNMP log is generated
seqNO Sequence number of the SNMP log ()
srcIP IP address of NMS
op SNMP operation type (GET or SET)
node Node name of the SNMP operations and OID of the instance
erroIndex Error index, with 0 meaning no error
errorstatus Error status, with noError meaning no error
value
Value set when the SET operation is performed (This field is null,
meaning the value obtained with the GET operation is not logged.)
When the value is a string of characters and the string contains
characters not in the range of ASCII 0 to 127 or invisible characters,
the string is displayed in hexadecimal. For example, value =
<81-43>[hex]
The system information of the information center can be output to the terminal or to the log buffer. In this
example, SNMP log is output to the terminal. For configuration of SNMP log output to other destinations,
see Information Center Configuration in the System Volume.