H3C S5120-EI Series User Manual

1-2
Creating a User Profile
Configuration Prerequisites
Before creating a user profile, you need to configure authentication parameters. User profile supports
802.1X authentications. You need to perform the related configurations (for example, username,
password, authentication scheme, domain and binding between a user profile and user) on the client,
the device and authentication server.
Creating a User Profile
Follow these steps to create a user profile:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a user profile, and enter the
corresponding user profile view
user-profile
profile-name dot1x
Required
If the specified user profile
already exists, you will directly
enter the corresponding user
profile view.
The configuration made in user
profile view takes effect when
the user profile is enabled and
the corresponding users are
online.
Refer to 802.1x Configuration in the Security Volume for detailed information about 802.1x
authentication.
Applying a QoS Policy to User Profile
After a user profile is created, you need to configure detailed items in user profile view to implement
restrictions on the online users. Currently supported configurations are as follows:
Follow these steps to apply a QoS policy to traffic of online users:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter user profile view
user-profile profile-name
[ dot1x ]
Required
The configuration made in user
profile view takes effect when
the user-profile is active and
the corresponding users are
online.
Apply the QoS policy
qos apply policy policy-name
{ inbound | outbound }
Required

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English