3-9
Features Description
System Maintenance
and Debugging
For the majority of protocols and features supported, the system provides
corresponding debugging information to help users diagnose errors. This
document describes:
z Maintenance and debugging overview
z Maintenance and debugging configuration
Information Center
As the system information hub, Information Center classifies and
manages all types of system information. This document describes:
z Information Center Overview
z Setting to Output System Information to the Console
z Setting to Output System Information to a Monitor Terminal
z Setting to Output System Information to a Log Host
z Setting to Output System Information to the Trap Buffer
z Setting to Output System Information to the Log Buffer
z Setting to Output System Information to the SNMP Module
z Configuring Synchronous Information Output
z Disabling a Port from Generating Link Up/Down Logging Information
PoE
The Power over Ethernet (PoE) feature enables the power sourcing
equipment (PSE) to feed powered devices (PDs) from Ethernet ports
through twisted pair cables. This document describes:
z PoE overview
z Configuring the PoE Interface
z Configuring PoE power management
z Configuring the PoE monitoring function
z Online upgrading the PSE processing software
z Configuring a PD Disconnection Detection Mode
z Enabling the PSE to detect nonstandard PDs
Track
The track module is used to implement collaboration between different
modules through established collaboration objects. The detection
modules trigger the application modules to perform certain operations
through the track module. This document describes:
z Track Overview
z Configuring Collaboration Between the Track Module and the
Detection Modules
z Configuring Collaboration Between the Track Module and the
Application Modules
NQA
NQA analyzes network performance, services and service quality by
sending test packets to provide you with network performance and
service quality parameters. This document describes:
z NQA Overview
z Configuring the NQA Server
z Enabling the NQA Client
z Creating an NQA Test Group
z Configuring an NQA Test Group
z Configuring the Collaboration Function
z Configuring Trap Delivery
z Configuring the NQA Statistics Function
z Configuring Optional Parameters Common to an NQA Test Group
z Scheduling an NQA Test Group
To Next Page
Loading...
Need help?
General