Features Description
UDP Helper
UDP Helper functions as a relay agent that converts UDP broadcast
packets into unicast packets and forwards them to a specified server. This
document describes:
z UDP Helper overview
z UDP Helper configuration
IPv6 Basics
Internet protocol version 6 (IPv6), also called IP next generation (IPng),
was designed by the Internet Engineering Task Force (IETF) as the
successor to Internet protocol version 4 (IPv4). This document describes:
z IPv6 overview
z Basic IPv6 functions configuration
z IPv6 NDP configuration
z PMTU discovery configuration
z IPv6 TCP properties configuration
z ICMPv6 packet sending configuration
z IPv6 DNS Client configuration
Dual Stack
A network node that supports both IPv4 and IPv6 is called a dual stack
node. A dual stack node configured with an IPv4 address and an IPv6
address can have both IPv4 and IPv6 packets transmitted. This document
describes:
z Dual stack overview
z Dual stack configuration
sFlow
Based on packet sampling, Sampled Flow (sFlow) is a traffic monitoring
technology mainly used to collect and analyze traffic statistics. This
document describes:
z sFlow Overview
z sFlow Configuration
To Next Page
Loading...
Need help?
General