Honda CM400A - Balancer Inspection

. .
HONDA
CB400T CRANKSHAFTIBALANCER
Remove the sprockets and damper rubbers.
BALANCER INSPECTION
Check the damper rubbers for weakness or
damage. Replace rubbers as a set.
Measure the balancer
I.D.
Measure the balancer shaft O.D.
Measure the clearance between the balancer
and balancer shaft.
SERVICE LIMIT:
0.08 mm (0.003 in.)
O.D. SERVICE LIMIT:
17:95 mm 10.707 in.)
Date of Issue: September. 1977
HONDA MOTOR co., LTD. 10-5