Honda CM400A - Special Tools; Common Tools

HONDA
GENERAL INFORMATION CB400T
SPEC1 AL TOOLS /COM MON TOOLS
SPECIAL TOOLS
COMMON TOOLS
Tool Name
Snap ring pliers
Hollow
set wrench (6 mml
Ball race driver - Bottom Steering Race*
Ball race driver
-Top steering Race*
Ball race remover
Valve guide reamer
(IN1
Valve guide reamer (EX1
TORX driver bit (T-30)
Piston ring compressor (21
Piston base (2)
Tool case
I Tool Name I part NO. I Apropriation List (Common tool - Special tool1 1
Part No.
07914-3230001
07917-3230000
07945-3330300
07946-3290000
07953-3330000
07984-2000000
07984-61 10000
07703-001 0200
07954-2830000
07958-2500000
07797-2920300
Float level gauge
Lock nut wrench socket
(30 x 32 mml
Pin spanner
Lock nut wrench socket
(26 x 29 mml
Extension bar
Universal holder
Rotor puller
Valve guide remover
(5.5 rnml (IN1
Valve guide remover (6.6 mml (EX1
*Bearing driver outer (42 x 47 mml
Bearing driver pilot (15 mm)
Bearing driver pilot (17 mml
"Bearing driver outer 152 x 55 rnm)
Bearing driver pilot (20 mml
t--
Pin spanner
Flywheel holder
Flywheel puller
Valve guide driver
Valve guide driver
"Bearing driver
'Bearing driver
Front fork oil seal driver body
Front fork oil seal attachment (Dl
1 077470010100 } ,or, seal driver
07747-0010500
1-6
Date of Issue: September, 1977
0 HONDA MOTOR CO., LTD.
Bearing driver handle
(A1
Valve spring compressor
Rear shock absorber compressor
The tools
asterisked ("I are to be used with the Handle-PIN 07749-0010000 or 07949-61 10000 (also listed above).
07749-0010000
07757-0010000
07959-3290001
Driver handle attachment 07949-61 10000
Valve spring compressor 07957-3290001
-