HONDA
C84001/CM4001~A*E.C
'81
ADDENDUM
IV.
WHEELS
SERVICE INFORMATION
GENERAL INSTRUCTIONS
This wheel section does not apply to the CM400E.
Do not remove rivets or nuts from the rim, spoke plate and hub since they cannot be disassembled.
Never stand on the spokes or try to bend the wheel.
Avoid damaging the aluminum alloy rim.
Check that the tubeless tire and and rim are free from damage or other faults.
When removing the tire from the rim, use the special tools; 'TIRE LEVER" (No. 07772-0020100) and "RIM PROTEC.
TOR" (No. 07772-0020201) or an approved tire changer to prevent damage to the rim.
For tubeless tire repairs, see the "HONDA MOTORCYCLE TUBELESS TIRE REPAIR MANUAL".
TIRE PRESSURE
NOTE
Tire pressure should be checked when
tires are COLD.
Check the tires for cuts, imbedded nails, or
other sharp obiects.
Recommended tire pressures and sizes:
Cold tire
Dressure
5702 (Bridgestone) 5703 (Bridgestone)
F11 (Dunlop)
F11 (Dunlop)
Date of Issue: December, 1980
o
HoNDA MOTOR
co.,
LTD.
26-13
To Next Page
Loading...
