EasyManua.ls Logo

Honda CM400A - Wheels and Spokes

Honda CM400A
317 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HONDA
INSPECTION
AND
ADJUSTMENT
CB400T
BATTERY ELECTROLYTE
Remove the right side cover.
The electrolyte level must be maintained
between the upper and 'lower level marks.
If the electrolyte level
is
low, remove the
battery filler caps.
Add distilled water.
Use only distilled water in the battery.
Tap water will shorten the service life
of the battery.
i"
-
Avoid contact with skin, eyes or
clothing. Flush with water and get
prompt medical attention when in
contact with skin or eves.
WHEELS/SPOKES
a
TIRE PRESSURE
NOTE
Tire pressure should be checked when
the tires are COLD.
Check the tires for cuts, imbedded nails, or
other sharp objects.
a
WHEEL SPOKE RETIGHTENING
(TYPE I)
Retighten the wheel spokes periodically.
TlGHTNlNG
TORQUE:
0.2-0.35 kg-m
(1.4-2.5 lbs-hl
3-14
,
Date of Issue: September, 1977
O
HONDA MOTOR CO., LTD.
Front: 1.75
(24)
Rear: 2.25 (32)
Front: 1.75 124)
Rear: 2.5
(36)
r
Cold
tire
pressures
kg/cm2 (psi)
Up to 90 kg
(200
ib) load
Up to vehicle
capacity load
Vehicle
capacity load
limit
-Tire
size
Tire
brand
150 kg (330 lbs)
.
Front: 3.60S19-4PR
Rear: 4.10S18.4PR
Front: YOKOHAMA Y-992
BRIDGESTONE
5702
Rear: YOKOHAMA Y-983
BRIDGSTONE
5302
-

Table of Contents

Related product manuals