Honda CM400A - Front Fork Installation

HONDA
CB40OT FRON
FRONT FORK INSTALLATION
Install the fork tubes in the fork top and
bottom bridges while rotating them by hand.
Ensure that each tube bears against the fork
top bridge.
.I I :
I :'.
Tighten the right and left fork:'dolts to the
specified torque.
TORQUE
SPECIFICATION;'.^
7.0-9.0 kg-m (51-65 lbs-ftl
Torque the front fork bolts at the fork
bottom bridge.
TORQUE SPECIFICATION:
1.8-2.5 kg-m (13-18 lbs-ft)
Install the fender.
Install the brake caliper.
Secure the brake hose.
Install the front wheel.
Date of Issue: September. 1977
@ HONOA MOTOR CO.. LTD.
12-1 7