Honda CM400A - Filling with Fork Oil; Oil Seal Installation

HONDA
FRONT WHEELIBRAKEISUSPENSION CB400T
OIL SEAL INSTALLATION
Drive the oil seal into position until the
snap ring groove appears.
Install the snap ring and
dust cover.
FILLING WITH FORK OIL
Use ATF (Automatic Transmission Fluid)
to fill the front fork.
NOTE
Pour the specified amount of ATF. Do
not overfill.
Slide the front cushion spring and spring
seat into position and tighten with the inner
bolt.
SHOP TOWEL OR SOFT JA
Place the fork tube in soft jaws.
avoiding the sliding surface.
Note the spring direction.
Date of Issue: September.
1977
@ HONDA MOTOR CO., LTD.