Honda CM400A - Battery; Wheel Spoke Tightening

HONDA
'80 ADDENDUM CM400E
VI. CYLINDER HEAD/VALVES
CYLINDER HEAD INSTALLATION
For details, refer to page 6-17.
Install the rubber sealed bolts at the left
cvlinder inboard location.
VII. WHEELS
TIRE PRESSURE
NOTE
Tire pressure should be checked when
Tire size
I U~t0
Cold 1 F$lbs)
tire
pres- 90 kg
sure3 (zoo I~S)
kg/cm2 load to
(psi) vehicle
capacity
STONE
brand
K127
HAMA
Check the tires for cuts, imbedded nails, 01
other sharp objects.
'\ -
.
TORQUE:
- 0.25-0.35 kg-m
11.4-2.5 ft-lb)
WHEEL SPOKE TIGHTENING
Check spoke tighteness, rim runout and
trueness.
TORQUE: 0.25-0.35
kg-m
(1.4-2.5 ft-lb)
VIII. BATTERY
BATTERY
CAUTION
The battery breather tube must be
routed as shown on the label. Do not
bend or twist the breather tube.
A bent
or kinked breather tube may pressurize
the battery and cause case damage.
7
25-10
Date of Issue: Dec., 1979
@ HONDA MOTOR CO., LTD.