HONDA
FRONT WHEELIBRAKEISUSPENSION
CB400T
INSTRUMENTS
CLUSTER DISASSEMBLY
Separate the instrument cluster by
the four screws.
Remove the instrument
set
plate by
the two bolts.
removing
removing
INDICATOR LAMPICOMBINA-
TION SWITCH REPLACEMENT
After installing a new bulb, check for con-
tinuty. If the bulb does not light, inspect
the wiring for open or short circuits. The
ignition switch wire
is
connected to the wiring
harness inside the headlight case.
METER LAMPIMETER
REPLACEMENT
TO replace a meter lamp or meter,
it
is neces-
sary to separate the cluster.
Remove the set plate and cable.
Check the meter cable if the needle swings
abnormally.
Date of Issue: September.
1977
O
HONDA MOTOR CO., LTD.
To Next Page
Loading...
