Honda CM400A - CB400 T, CM400 C: Front Disc Brake Pad; Front Air Forks

CB400T, CM400C:
FRONT DISC BRAKE PAD
Check the brake pads for wear by looking
through the slot pointed to by the cast arrow
on the caliper assembly.
Replace the brake pads if the wear line on the
pads reaches the edge of the brake disc.
(Refer to page
26-22).
CAUTION I
Always replace the brake pads in pairs
( to assure even disc pressure.
FRONT AIR FORKS
NOTE
This does not apply to the
CM4OOE.
Place the vehicle on its center stand.
Remove the valve cap and measure the front
fork air pressure.
FRONT FORK AIR PRESSURE:
0.8 & 0.2 kg/cm2 (11 & 3 psi)
NOTE
Check the front fork air pressure when
the front forks are cold.
HONDA
'81 ADDENDUM C8400T/CM4001~A~E~C
Date of Issue: December, 1980
GI HONDA MOTOR CO., LTD.