Honda CM400A - Cam Bearing Surface Inspection; Camshaft Holder Rocker Arm Shaft Hole Inspection; Rocker Arm Shaft Inspection

HONDA
CB400T CYLINDER HEADIVALVE
ROCKER ARM SHAFT INSPEC-
TION
Inspect the rocker arm shahs for wear or
damage. Measure the
0.0.
CAMSHAFT HOLDER ROCKER
ARM SHAFT HOLE INSPECTION
Measure the I.D. of the rocker arm shah hole
of the camshaft holders.
8 CAM BEARING SURFACE
INSPECTION
Inspect the cam bearing surfaces for scoring,
scratches, or evidence of insufficient lubrica-
tion.
Make sure the oil passages are clear.
O.D. SERVICE LIMIT:
11.95
mm (0.470 in.)
Date of Issue: September.
1977
@ HONDA MOTOR CO., LTO.
6- 5