HONDA
CRANKSHAFTIBALANCER
CB40OT
NOTE
Rotate the stopper plate clockwise
fully.
Torque the
8
mm nut.
Install the cam chain tensioner.
Assemble the rear chain guide and oil orifice.
NOTE
Be sure the oil orifice is not clogged.
Align the front balancer
"TC"
mark and
crankshaft aligning mark with the end of
the crankcase.
Install the chain so that the rear balancer
"TH"
mark is flush with the end of the
crankcase.
10-16
Date of Issue: September.
1977
O
HONDA MOTOR CO.. LTD.
To Next Page
Loading...
