Table of Contents
10 H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Section 4: Start-Up and Fault Management .......................................................................113
4.1: Start-Up......................................................................................................................................................113
4.1.1: Required Materials...........................................................................................................................113
4.1.2: Preliminary Checks..........................................................................................................................113
4.1.3: Checks on Cables from Field Devices.............................................................................................113
Balanced Input Cables (S81-F3002 Modules)....................................................................................113
Analog Input Cables (S81-F4001, S81-F4002, S81-F4003 Modules) ...............................................113
Addressable Loop Cables (S81-F7002, S81-F7007, S81-F7009, S81-F7010 Modules) ...................113
Audible Alarm Device Control Cables (S81-F5003 Modules) ..........................................................114
Solenoid Control Cables (S81-F5001, S81-F5004 Modules).............................................................114
25 VDC Power Cables........................................................................................................................114
4.1.4: Start..................................................................................................................................................114
4.1.5: Functional Tests...............................................................................................................................114
4.2: Management of Faults................................................................................................................................115
4.2.1: Power Supply Set Fault ...................................................................................................................115
4.2.2: Central Unit Fault ............................................................................................................................115
4.2.3: I/O Module Fault .............................................................................................................................115
4.2.4: Replacing One Module of the S81-PU001 Power Supply Set ........................................................115
4.2.5: Replacing One Module of the S81-PU002 Power Supply Set ........................................................115
4.2.6: Battery Replacement........................................................................................................................116
4.2.7: Replacement of the CPU .................................................................................................................116
4.2.8: I/O Module Replacement.................................................................................................................116
4.2.9: Replacement of Fuses......................................................................................................................117
4.2.10: Repair of a Faulty Module.............................................................................................................117
4.2.11: Customer Service and Training .....................................................................................................117
Section 5: Maintenance........................................................................................................118
5.1: Steelwork ...................................................................................................................................................118
5.2: Batteries .....................................................................................................................................................118
5.3: Field Devices .............................................................................................................................................118
5.4: Functional Tests .........................................................................................................................................118
Section 6: Application Notes...............................................................................................120
6.1: Notes for the Development of Systems in Compliance with the EN54-2 / EN54-4 Standard ..................120
6.2: Notes for the Development of Systems in Compliance with the EN12094-1 Standard............................120
6.2.1: Processing of signals and indicators................................................................................................121
6.2.2: Compulsory Functions.....................................................................................................................121
6.2.3: Optional Functions...........................................................................................................................121
6.2.4: Light Indicators................................................................................................................................122
6.2.5: Monitored Inputs .............................................................................................................................122
6.2.6: Monitored Outputs...........................................................................................................................122
6.2.7: Non-monitored Outputs...................................................................................................................122
6.2.8: Receiving and Processing Inbound Actuation Signals....................................................................123
6.2.9: Transmission of the Release Signal.................................................................................................123
6.2.10: Actuation of Alarm Devices ..........................................................................................................123
6.2.11: Main Voltage Detection Signal .....................................................................................................123
6.2.12: “Activated” Condition ...................................................................................................................123
6.2.13: “Released” Condition ....................................................................................................................123
6.2.14: Resetting the “Activated” and “Released” Conditions..................................................................124
6.2.15: Fault Condition..............................................................................................................................124
6.2.16: Out of Service Condition...............................................................................................................124
6.2.17: Release Signal Delay.....................................................................................................................124
6.2.18: Signal Representing Extinguishing Agent Flow............................................................................124
6.2.19: Emergency Hold............................................................................................................................125
Mode-A...............................................................................................................................................125
Mode-B...............................................................................................................................................125
6.2.20: Activation of a Secondary Release Sequence................................................................................125
To Next Page
Loading...
Need help?
General
