Honeywell H-S81-HS User Manual

154 H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Operating Instructions Operations at Access Level 3
7.17.2 Zone Status
To view zone status. The list of alarm, tamper and trouble zones can be shown, with the relevant
details. In this page, the overview modes are the same of area 1, with the additional feature that
zone statuses are displayed under normal conditions. If there is at least one included zone, the
Included Zones message is displayed. Otherwise, the Excluded Zones message is shown.
7.17.3 Control Panel Tamper Status
To view the control panel tamper status. It can be Normal, Active or Disabled. If it is disabled, the
remaining time before automatic enabling is shown. In this page, control panel tamper reset is pos-
sible.
7.17.4 Disabling
To view the list of disabled zones and devices. Disabling overview is the same of that of area 1.
7.17.5 Event History
To view the history of the last 250 events.
7.17.6 Alarm History
To view the history of the last 100 alarms. History overview is the same of that of area 1.
7.18 Operations at Access Level 3
By entering level 3 password, preceded by the prefix 2, the main menu shown below is accessed.
The Exclusion/Inclusion and View options are the same as those of level 2.
Figure 7.36 Main Menu at Access Level 3

Honeywell H-S81-HS Specifications

General

Brand	Honeywell
Model	H-S81-HS
Category	Control Panel
Language	English