Honeywell H-S81-HS User Manual

138 H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Operating Instructions Management
7.7.4 Local Sounder
Select this option to enable/disable the local sounder.
7.8 Management
By selecting this option from the main menu, the “management” stage is accessed, as shown in the
picture below.
7.8.1 Loop Reset
Select this option to reset the loop for S81-F7002 and S81-F7007 type modules. If the module does
not exist, or is of a different type, an error message is displayed. Loop reset is required to reset a
short circuit condition or to temporarily remove the Logon Fault signal.
7.8.2 Date and Time Changing
By selecting this option, the system date/time setting page is displayed. This step allows to change
the various parameters. If the entered value is not allowed, an error message is displayed.
NOTE: In compliance with the EN12094-1 standard, no disabling is possible in fire extinguishing
zones during the discharge activation sequence.
Figure 7.12 Management Menu
Figure 7.13 Changing Date/time

Honeywell H-S81-HS Specifications

General

Brand	Honeywell
Model	H-S81-HS
Category	Control Panel
Language	English