Honeywell H-S81-HS User Manual

H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015 117
Management of Faults Start-Up and Fault Management
4.2.9 Replacement of Fuses
Fuses must be replaced exclusively with fuses of the same type and value. See the table below for
fuse types.
4.2.10 Repair of a Faulty Module
The repair of a faulty module must be carried out by the manufacturer only. Send faulty modules to
Honeywell for repair, together with a brief description of the type of fault.
4.2.11 Customer Service and Training
The customer service of Honeywell can support the final user during design, development and test-
ing of H-S81-HS-type systems. Furthermore, specific training courses on this product can be orga-
nized on request at our premises. For any technical information, please use the following contacts:
Honeywell Industrial Training Center
Ph. 713-577-1510
E-mail: honeywellsafetytraining@honeywell.com
Location Type Value
Fuse for PU-A0005-1 power supply unit 5x20 ultra fast glass fuse T6,3A H250V
Fuse for PU-A0008-1 power supply unit 5x20 ultra fast glass fuse T10A H250V
Battery fuse disconnect switch for S81-PU0001 10x38 fuse link 20A-G
Battery fuse disconnect switch for S81-PU-0002 10x38 fuse link 50A-G

Honeywell H-S81-HS Specifications

General

Brand	Honeywell
Model	H-S81-HS
Category	Control Panel
Language	English