Honeywell UDC2800 User Manual

5. Select a group and edit configurations.
NOTE: The groups are organized exactly as on the
instrument itself.
If an analog configuration is highlighted with red text or a digital
configuration is shown blank, it means that the stored value is
now out of range, either because of previous changes to the
instrument’s configuration or because of incompatibilities with
the configuration set. Change the configuration to an in-range
setting to correct the error.
291
Chapter 10 - Configuration via Honeywell EasySet

Honeywell UDC2800 Specifications

General

Control Modes	PID, ON/OFF, Manual
Mounting	Panel Mount
Display	Dual 4-digit LED
Input Types	Thermocouple, RTD, mA, mV, V
Output Types	Relay
Power Supply	100-240 VAC, 50/60 Hz
Communication	RS-485 Modbus RTU
Enclosure Rating	NEMA 4X