Honeywell UDC2800 User Manual

Mounting Method
Before mounting the controller, refer to the nameplate on the outside
of the case and make a note of the model number. It will help later
when selecting the proper wiring configuration.
Figure 3-2: Mounting Methods
Item Description
1 Attach screws and washers here for water protection
2 Mounting clips
47
Chapter 3 - Installation

Honeywell UDC2800 Specifications

General

Control Modes	PID, ON/OFF, Manual
Mounting	Panel Mount
Display	Dual 4-digit LED
Input Types	Thermocouple, RTD, mA, mV, V
Output Types	Relay
Power Supply	100-240 VAC, 50/60 Hz
Communication	RS-485 Modbus RTU
Enclosure Rating	NEMA 4X