Honeywell UDC2800 - Miscellaneous Read Onlys

326
Miscellaneous Read Onlys
Register Addresses for Read Only
The identifying register addresses listed in this table represent some
information that is Read only. No Writes allowed.
Table 11-8: Miscellaneous Read Only
Parameter
Description
Register Address
Data
Type
Access
Data Range or Enumerated
Selection
Hex Decimal
Software Type 9C5 2501 INT RD 0 ~ 65535
Software Version 9C6 2502 INT RD 0 ~ 65535
SetPoint Program Read Only Information
The identifying register addresses listed this table represent some
information for Setpoint Programming that is Read only. No Writes
allowed.
Table 11-9: Miscellaneous Read Onlys
Parameter Description
Register Address
Data
Type
Access
Data Range or
Enumerated Selection
Hex Decimal
Present SPP Segment
Number
9C8 2504 INT RD 1 ~ 8
Segment Time
Remaining in Minutes
9C9 2505 INT RD 0 ~ 5976 Minutes
Segment Time
Remaining in Hours
9CA 2506 INT RD 0 ~ 99 Hours
Cycles Remaining 9CB 2507 INT RD 0 ~ 99
Current Cycle Number 9CC 2508 INT RD 0 ~ 99
Chapter 11 - Modbus RTU Function Codes 20&21