Honeywell UDC2800 - Page 366

366
Parameter
Description
Register
Address
Data
Type
Access
Data Range or Enumerated
Selection
Hex Decimal
6 = + To Run
7 = + To Local SP 3
8 = + To Local SP 4
Digital Input 2
Function *
8BB 2235 INT
R/W
Same as Digital Input 1
Function
Digital Input 2
Combinations
8BC 2236 INT
R/W
0 = Disable
1 = + PID Sets 2
2 = + To Direct Action
3 = + To Local SP 2
4 = + Disable Tune
5 = +To Local SP 1
6 = + To Run
7 = + To Local SP 3
8 = + To Local SP 4
* Auxiliary Output and Digital Input #2 are mutually exclusive.
Communications
Table below lists all the register addresses and ranges or selections
for the function parameters in Set-up Group Communications.
Table 11-31: Set-up Group – Communications
Parameter
Description
Register
Address
Data
Type
Access
Data Range or Enumerated
Selection
Hex Decimal
Bluetooth
Function
8C1 2241 INT
R/W
0 = Disable
1 = Enable
Chapter 11 - Modbus RTU Function Codes 20&21