Honeywell UDC2800 - Page 410

410
Parameter Description
Register Address
Access Description
Hex Decimal
does not
support
seconds
Ramp Units
1F7B 48060 R Bit Packed
Bit 0:0: Time; 1:
Rate Bit
1-15: Unused
Program End Segment (Program 1
only)
1F7D 48062
R/W Bit Packed
Bit 0: 1: 2
1: 1: 4
2: 1: 6
3: 1: 8
Program Termination State 1F7E
48063 R/W Bit Packed
Bit 0: 0: Last SP
(Hold at last SP in
program)
1: F'SAFE (Manual
mode, failsafe
output)
1-15: Unused
Program State at Program End 1F7F
48064 R/W Bit Packed
Bit 0: 0: Disable; 1:
Hold
1-15: Unused
Engineering Units for Ramp
Segments
1F80
48065 R/W Bit Packed
Bit 0: 0: Hrs:Mins
0: 1: Degrees/Min
Chapter 12 - Standard Modbus Read, Write and Override Parameters