HP 8753E - Page 204

f. Repeat the “Sampler Correction Constants Routine” starting at step 16.
n If the analyzer continues to fail this adjustment routine, refer to Chapter
7, “Source Troubleshooting. n
B Channel Sampler
b- Enter the new value at the accessed address by pressing :@I& (66) (xl.
. . . . . . . .
C- Access the second address by pressing ;~~~~~~:~~~~~~:,~ (jj)
.. . . . . . . . . ;a :..; . . . . . . i..............................~........~............~.........~....~.........--.~~
-...... .._ s.
(QiJ
_ ..,:,.,.
de Enter the new value at the accessed address by pressing @$l$R 1128J
(XJ
e. Press w for the analyzer to use the new values.
f. Repeat the “Sampler Correction Constants Routine” starting at step 16.
w If the analyzer continues to fail this adjustment routine, refer to Chapter
7, “Source Troubleshooting. n
Adjustments and Correction Constants
3-27