SWEEP MODE CHANGED TO CW TIME SWEEP
Error Number If you select external source auto or
manuai
instrument mode
187
and you do not
also
select CW mode, the
anaIyzer
is
automatically switched to CW.
TEST ABORTED
Error Number You have prematurely stopped a service test.
113
TROUBLE! CHECK SETUP AND START OVER
Service Error Your equipment setup for the adjustment procedure in progress
Number 115 is not correct. Check the setup diagram and instructions in the
“Adjustments and Correction Constants” chapter. Start the
procedure again.
WRONG DISK FORMAT, INITIALIZE DISK
Error Number You have attempted to store, load, or read
hle
titles, but your
77
disk format does not conform to the Logical Interchange Format
(LIF).
You must initialize the disk before reading or writing to it.
lo-60
Service Key Menus and Error Massages
To Next Page
Loading...
