Line Fuse
Tools Required
n
small slot screwdriver
Removal
Warning
For continued protection against fire
hazard,
replace fuse
only with same type
and
rating (3 A 250
VAC).
The use of
other
fuses or materials is prohibited.
1. Disconnect the power cord.
2. Use a small slot screwdriver to pry open the fuse holder.
3.
Replace the failed fuse with a 3 AF 250 V F fuse. See “Hardware,
Preregulator” in Chapter 13 to find the part number.
Replacement
1. Simply replace the fuse holder.
144
Assembly Replaoement and Post-Repair Procedures
To Next Page
Loading...
