HP 8753E - Page 67

5. Minimum R Channel Level
Specifications
1 Frequency Range 1 Minimum B Channel Level 1
1300kHzto3GHz 1
c-35 dBm
I
13GHzto6GHzl 1
c-30 dBm
I
1OnlyforanalyzerswithOption006-3OkHzto6GHz
range.
Required Equipment for 500 Analyzers
Adapter, APC-3.5 (m) to APC-7
. . . . . . . . . . . . . . . . . . . , . . . . . . . . . . HP P/N 1250-1746
Cable, APC-7 24-inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP P/N 8120-4779
Required Equipment for 75 ohm Analyzers (Option 075)
Minimum Loss Pad, 5OQ to 75Q
. . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 11852B
Cable, 508 Type-N, 24-inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HP P/N 8120-4781
Adapter, APC-3.5 (m) to Type-N (f)
. . . . . . . . . . . . . . . . . . . . . . . . . . HP P/N 1250-1750
An&m warmup time: 1 hour
Perform this test to determine the minimum R channel input power level at
which phase lock can be accomplished.
1. Connect the equipment as shown in Figure 2-12.
System Verification and 2-31
Performance Tests