HP 8753E - Page 73

6. ‘Jkst Port Input Noise Floor Level
Specifkations
Frequency Range ‘l&t Port IF Bandwidth
Average
Noise Level
300 kHz to 3.0 GHz
Port
1 3kHz
-82
dBm
300 kHz to 3.0 GHz
Port
1 10 Hz
-102 dBm
300 kHz to 3.0 GHz
Port
2 3 kHz
-82 dBm
300 kHz to 3.0 GHz
Port
2 10 Hz
-102 dBm
3.0 GHz to 6.0 GHz’
Port
1 3kHz
-77
dBm
3.0 GHz to 6.0 GHzl
Port
1 10 Hz
-97 dBm
3.0 GHz to 6.0 GHzl
Port
2 3kHz
-77 dBm
3.0 GHz to 6.0 GHz’
Port
2 10 Hz
-97 dBm
1 Only for analyzer with Option 006 - 30 kHz to 6 GHz range.
Equipment Required for 508 Analyzers
Calibration Kit, 7-mm . . . . . . . . . . . . . . . . . . . . . . . . . , , . . . . . . . . . . . . . . . . . . . . . HP 85031B
Equipment Required for 75 ohm Analyzers
Calibration Kit, Type-N
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 85036B
An&zerwarmuptime:1 hour
Perform this test to determine the HP 8753E port 1 and port 2 noise floor levels
at the input test ports
Syctem Verification and 2-37
Performance Tests