Huawei Quidway S9300 - Interfaces; Interface Attributes; Table 5-39 Types and Functions of the Interfaces on the G48 S; Table 5-40 Attributes of the 1000 M Base-SFP Ethernet Optical Interfaces

Indicator/Button Color Description
Red If the indicator is in red, it indicates that the
LPU is faulty.
Orange If the indicator is in orange, it indicates that
the LPU is installed, and the board is powered
on.
ACT Amber If the indicator blinks, the data is being
transmitted or received.
LINK Green-yellow If the indicator is on, it indicates that the link
is connected.
5.8.4 Interfaces
Interfaces
Table 5-39 describes the types and functions of the interfaces on the G48S.
Table 5-39 Types and functions of the interfaces on the G48S
Name
Quantity Description
100M/1000M BASE-
X optical interface
48 The G48S provides 48 Ethernet optical
interfaces (100M/1000M auto sensing) to
transmit and receive Ethernet services.
5.8.5 Interface Attributes
The G48S has only the data interfaces. Each interface has an optical module. Table 5-40, Table
5-41 and Table 5-42 show the attributes of the interfaces and the optical modules on the G48S.
Table 5-40 Attributes of the 1000M Base-SFP Ethernet optical interfaces
Attribute
Description
Connector type LC/PC
Optical interface
attribute
Depending on the optical module.
Compliance
standard
IEEE 802.3z
Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Network protocol IP
5 Boards
Quidway S9300 Terabit Routing Switch
Hardware Description
5-38 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2010-12-15)