Huawei Quidway S9300 - Optical Fiber; Introduction; Table 6-11 Technical Specifications of the Crossover Cable; Table 6-12 Types of the Optical Fibers

Table 6-11 Technical specifications of the crossover cable
Item Specification
Connector
X1/X2
Network interface connector-Crystal connector-8PIN-8 bits-Shield-Plug-24
to 26 AWG-CAT 6/SFTP network cable
Power cable Communication cable-100±15 non-shield enhanced 5 types-CAT5E SFTP 24
AWG-8-core PANTONE 646 U
Number of
cores
8 cores
Fire-
resistance
CM
Length 5 m or 30 m
6.6 Optical Fiber
This section describes the structure and technical specifications of the optical fibers.
6.6.1 Introduction
6.6.2 Optical Connector
6.6.3 Technical Specifications
6.6.1 Introduction
Table 6-12 provides the types of optical fibers used by the S9300.
Table 6-12 Types of the optical fibers
No.
Cable and Use Local
Connector
Remote
Connector
Cables
1 Fiber connecting the
local LPU to the ODF
LC/PC FC/PC Single mode
2 Fiber connecting to the
local LPUs
LC/PC LC/PC Single mode/
multimode
3 Fiber connecting the
local LPU to the other
equipment
LC/PC SC/PC or LC/
PC
Single mode/
multimode
NOTE
The optical transmission module of the multitransverse mode needs to be connected to the multimode fiber.
The optical transmitting module of the single-longitudinal mode or multi-longitudinal mode needs to be
connected to the single-mode fiber.
Quidway S9300 Terabit Routing Switch
Hardware Description 6 Cables
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-11