Huawei Quidway S9300 - S9306; Figure 2-4 Appearance and Components of the S9306 (1)

Component Description Reference
Fan module The fan modules are installed at the rear of the
equipment. The equipment must be equipped with
four fan modules.
See 4.2 Fan
Module.
Power supply The power supplies are installed in slots PWR1 to
PWR4. The S9312 can use DC or AC power
supplies.
See 3 Power
Supply.
Cabling rack The cable distribution posts are located on the
right side of the board cage of the S9312.
-
Cable The cables of the S9312 include internal cables
(such as power cables and signal cables), optical
fibers, and external cables.
See 6 Cables.
2.2.2 S9306
The S9306 is 10 U (1 U = 44.45 mm) high, with dimensions of 442 mm x 476 mm x 441.7 mm
(width x depth x height). Figure 2-4 and Figure 2-5 shows the appearance and components of
the S9306. Figure 2-6 shows the layout of slots on the S9306.
Figure 2-4 Appearance and components of the S9306 (1)
1. LPU
2. SRU 3. Rack-mounting ear
4. Cabling rack 5. PoE Power Module 6. CMU
7. Power Supply
2 Overview of the S9300
Quidway S9300 Terabit Routing Switch
Hardware Description
2-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2010-12-15)