Huawei Quidway S9300 - Interfaces; Table 5-46 Types and Functions of the Interfaces on the G48 T; Table 5-47 Attributes of the 100 M;1000 M Base-T Ethernet Interface

Indicator/Button Color Description
Red If the indicator is in red, it indicates that the
LPU is faulty.
Orange If the indicator is in orange, it indicates that
the LPU is installed, and the board is powered
on.
Link/ACT Green If the indicator is on, it indicates that the link
is connected.
If the indicator blinks, the data is being
transmitted or received.
5.9.4 Interfaces
Table 5-46 describes the types and functions of the interfaces on the G48T.
Table 5-46 Types and functions of the interfaces on the G48T
Name
Quantity Description
10M/100M/1000M
BASE-T electrical
interface
1 The G48T provides 48 Ethernet electrical
interfaces (10M/100M/1000M auto sensing)
to transmit and receive Ethernet services.
5.9.5 Interface Attributes
Table 5-47 describes the attributes of the 100M/1000M Base-T Ethernet interface.
Table 5-47 Attributes of the 100M/1000M Base-T Ethernet interface
Attribute
Description
Connector type RJ45
Compliance
standard
IEEE 802.3z
Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Network protocol IP
5.9.6 Technical Specifications
Table 5-48 describes the technical specifications of the G48T.
Quidway S9300 Terabit Routing Switch
Hardware Description 5 Boards
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-43