Huawei Quidway S9300

Table 5-63 Interface attributes of the FE optical interface card (100M Base-SFP)
Attribute Description
Connector type LC/PC
Optical interface
attribute
Depending on the SFP optical module. For details about the attributes of
the optical module, see Table 5-64.
Compliance
standard
IEEE 802.3u
Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Network protocol IP
Table 5-64 Attributes of the SFP optical module (100 Mbit/s)
Attrib
ute
Description
Transm
ission
distanc
e
2 km 15 km 15 km (single-mode
bidirectional fiber)
40 km 80 km
Center
wavele
ngth
1310 nm 1310 nm Tx:
1310nm
Rx:
1550nm
Tx:
1550nm
Rx:
1310nm
1310 nm 1550 nm
Transm
itting
power
-19.0 dBm
to -14.0
dBm
-15.0 dBm
to -8.0
dBm
-15.0 dBm
to -8.0
dBm
-15.0 dBm
to -8.0
dBm
-5.0 dBm
to 0 dBm
-5.0 dBm
to 0 dBm
Receiv
er
sensitiv
ity
-30.0 dBm -31.0 dBm -32.0 dBm -32.0 dBm -37.0 dBm -37.0 dBm
Overlo
ad
optical
power
-14.0 dBm -8.0 dBm -8.0 dBm -8.0 dBm -10.0 dBm -10.0 dBm
Extincti
on ratio
10 dB 8.2 dB 8.5 dB 8.5 dB 10.5 dB 10.5 dB
Fiber
type
Multi-
mode
Single-mode
5.12.6 Technical Specifications
Quidway S9300 Terabit Routing Switch
Hardware Description 5 Boards
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-55