Huawei Quidway S9300

Table 5-58 Attributes of the 100M/1000M Base-T Ethernet electrical interface
Attribute Description
Connector type RJ45
Operation mode 100M/1000M auto-sensing
Supports half duplex and full duplex modes.
Compliance
standard
IEEE 802.3z
Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Network protocol IP
5.11.6 Technical Specifications
Table 5-59 describes the technical specifications of the G48CEAT.
Table 5-59 Technical specifications of the G48CEAT
Item
Specification
Board dimensions
(depth x width x
height)
426.8 mm x 394.7 mm x 35.1 mm
Power
consumption
62 W
Weight 2.50 kg
5.12 F48S - 48-Port 100BASE-FX Interface Card (SFP)
This section describes the 48-Port 100BASE-FX Interface Card (EA,SFP) and 48-Port
100BASE-FX Interface Card (EC,SFP), including the appearance, functions and features, panel,
interface attributes, and technical specifications.
5.12.1 Introduction
5.12.2 Function and Application
5.12.3 Panel
5.12.4 Interfaces
5.12.5 Interface Attributes
5.12.6 Technical Specifications
5 Boards
Quidway S9300 Terabit Routing Switch
Hardware Description
5-52 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2010-12-15)