Huawei Quidway S9300

Table 5-71 Description of buttons and indicators on the G24CA panel
Indicator/Button Color Description
RUN/ALM Green If the indicator is on, it indicates that the LPU
is powered on, but the software is not running.
If the indicator blinks 2s (0.5 Hz), it indicates
that the system is running normally.
If the indicator blinks every 0.25s (4 Hz), it
indicates that the system is starting.
Red
If the indicator is in red, it indicates that the
LPU is faulty.
Orange If the indicator is in orange, it indicates that
the LPU is installed, and the board is powered
on.
ACT Amber If the indicator blinks, the data is being
transmitted or received.
LINK Green-yellow If the indicator is on, it indicates that the link
is connected.
Link/ACT Green If the indicator is on, it indicates that the link
is connected.
If the indicator blinks, the data is being
transmitted or received.
5.14.4 Interfaces
Table 5-72 describes the types and functions of the interfaces on the G24CA.
Table 5-72 Types and functions of the interfaces on the G24CA
Name
Quantity Description
100/1000M BASE-T
electrical interface
8 The G24CA provides 8 Ethernet electrical
interfaces (100M/1000M auto sensing) to
transmit and receive 1000 Mbit/s Ethernet
services.
100/1000M BASE-X
optical interface
24 The G24CA provides 24 Ethernet optical
interfaces (100M/1000M auto sensing) to
transmit and receive 1000 Mbit/s Ethernet
services.
NOTE
A Combo interface works as either an optical interface or an electrical interface. You can run the combo-
port { copper | fiber } command to set the mode of the Combo interface.
Quidway S9300 Terabit Routing Switch
Hardware Description 5 Boards
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-61