Juniper BTI7800 Series - Table 65: QSFP+ 40 GE SR4: QSFPP-40 GBASE-SR4 (740-067443)

Table 64: QSFP+ 4x10GBASE SR: QSFPP-4X10GE-SR (740-054053) (continued)
UnitsMaximumTypicalMinimumParameter
m300 (OM3)
400 (OM4)
–0.5Reach
MTP/PCConnector/Latch type
Maximum: 1.5 WPower consumption
IEEE 802.3, FC-PI-4Compliance
Table 65: QSFP+ 40GE SR4: QSFPP-40GBASE-SR4 (740-067443)
UnitsMaximumTypicalMinimumParameter
Gbps10.3125 +/- 100 ppmSignaling speed per lane
––4–Number of lanes
nm860–840Lane center wavelength
Transmitter
dBm2.4–-7.6Average launch power per lane
dB––3Extinction ratio
dB12––Optical return loss tolerance
Receiver
dBm2.4–-9.5Average receive power per lane
dBm-5.4––Stressed receiver sensitivity (OMA)
per lane
dB-12––Reflectance
Other
MMFFiber type
m100 (OM3)
150 (OM4)
–0.5Reach
12-Fiber MPOConnector/Latch type
Maximum: 1.5 WPower consumption
Copyright © 2019, Juniper Networks, Inc.166
BTI7800 Series Hardware Overview and Installation Guide