Juniper BTI7800 Series - BTI7802 Chassis; Figure 5: BTI7802 Chassis Front View; Table 11: BTI7802 Common Equipment Components

Table 10: BTI7814 Chassis Specifications (continued)
SpecificationShell
GR-1089
GR-3160 (basic temperature range)
NEBS
BTI7802 Chassis
The BTI7802 chassis has 2 universal slots that can be individually equipped with
traffic-carrying service modules. The BTI7802 can be installed into 19-inch, 23-inch, and
ETSI 600-mm racks.
The BTI7802 supports redundant management modules, AC and DC power options, and
service modules for high availability.
The chassis provides front access for all components:
•
One slot for the cooling module
•
Two slots for service modules
•
Two slots for redundant Chassis Management Modules
•
Two slots for redundant PEM modules
•
One slot for the Chassis Alarm Panel
Figure 5: BTI7802 Chassis Front View
The following table lists the common equipment for the BTI7802 chassis:
Table 11: BTI7802 Common Equipment Components
Release IntroducedPECComponent
Release 1.3BT8A78CAP22-Slot Chassis Alarm Panel
Release 1.6BT8A78FAN22-Slot Chassis Cooling Module
Release 1.3BT8A78PEM1-DC1-Slot/2-Slot Chassis DC Power Entry Module
Release 1.3BT8A78PEM1-AC1-Slot/2-Slot Chassis AC Power Entry Module
Copyright © 2019, Juniper Networks, Inc.34
BTI7800 Series Hardware Overview and Installation Guide