NOTE: Failure to comply with these rules might lead to adverse thermal
behavior and premature failure.
BTI Interface Card (BIC)
BTI Interface Cards (BICs) are modules that hold pluggable transceivers. The transceivers
are plugged into the BICs, which in turn are inserted into the UFMs. A BIC can be installed
into a UFM3 or a UFM4.
There are different types of BICs depending on the pluggables required. By housing
different BICs, a UFM can hold different combinations of 10-Gbps and 100-Gbps interfaces.
There is no restriction on which BIC or which pairing of BICs can be installed in a UFM.
•
12x SFP+ BIC on page 122
•
1x CFP BIC on page 124
•
BIC Handles and Latches on page 125
•
Installing a BIC on page 125
•
Removing a BIC on page 126
•
Replacing a BIC on page 128
•
Installing or Removing a BIC Filler Panel on page 128
•
BIC LEDs on page 130
12x SFP+ BIC
The 12x SFP+ BTI Interface Card (12x SFP+ BIC) contains twelve 10-Gbps ports.
The 12x SFP+ BIC supports SFP+ pluggable optics including 850nm, 1310nm, and DWDM.
Copyright © 2019, Juniper Networks, Inc.122
BTI7800 Series Hardware Overview and Installation Guide
To Next Page
Loading...
Need help?
General
