Figure 53: GigaLight Cassette
Alternatively, you can provide access to the individual 10-Gbps channels through a fiber
breakout cable directly, without using the GigaLight fiber cassette solution. The breakout
cable connects to the QSFP+ transceiver at one end and provides four LC/UPC connectors
at the other end for access to the four individual 10-Gbps channels.
The components for both of these options are listed in Fiber Breakout Components.
GigaLight SMF Elite MTP (Angled) LC/UPC 1x8F to MTP MiniCassette Specifications
The GigaLight SMF Elite MTP (Angled) LC/UPC 1x8F to MTP MiniCassette connects to
the QSFP+ transceiver through an MTP connector and provides access to the individual
10-Gbps channels through four LC/UPC ports.
Table 92: GigaLight SMF Elite MTP (Angled) LC/UPC 1x8F to MTP MiniCassette Specifications
SpecificationAttribute
Physical Dimensions
103 mmWidth (includes faceplate)
12 mmHeight
120 mmDepth
UnitsMaximumTypicalMinimumOptical
dB0.350.25-Insertion loss (MTP)
dB0.30.1-Insertion loss (LC/UPC)
MTP, LC/UPCConnector
Copyright © 2019, Juniper Networks, Inc.226
BTI7800 Series Hardware Overview and Installation Guide
To Next Page
Loading...
Need help?
General
