Juniper BTI7800 Series - BTI7800 100-Gbps Transceiver Optical Specifications; Table 70: QSFP28 100 GE AOC: JNP-100 G-AOC-XX (740-06 Xxxx); Table 71: CFP 100 GBASE-SR10 100 M: BP3 AMASS

Table 69: QSFP28 100GE SR4: QSFP-100GBASE-SR4 (740-058734) (continued)
UnitsMaximumTypicalMinimumParameter
Maximum: 3.5 WPower consumption
IEEE 802.3Compliance
Table 70: QSFP28 100GE AOC: JNP-100G-AOC-xx (740-06xxxx)
UnitsMaximumTypicalMinimumParameter
Gbps25.78125 +/- 100 ppmSignaling speed per lane
––4–Number of lanes
JNP-100G-AOC-1M (740-065630) - 1 m
JNP-100G-AOC-3M (740-065631) - 3 m
JNP-100G-AOC-5M (740-065632) - 5 m
JNP-100G-AOC-7M (740-065633) - 7 m
JNP-100G-AOC-10M (740-061411) - 10 m
JNP-100G-AOC-15M (740-068217) - 15 m
JNP-100G-AOC-20M (740-064981) - 20 m
JNP-100G-AOC-30M (740-064980) - 30 m
Reach
Not applicableConnector/Latch type
Maximum: 3.5 WPower consumption
IEEE 802.3Compliance
BTI7800 100-Gbps Transceiver Optical Specifications
NOTE: Contact Juniper Networks Support to confirm the power consumption
values for any transceiver before using for planning or implementation
purposes.
Table 71: CFP 100GBASE-SR10 100m: BP3AMASS
UnitsMaximumTypicalMinimumParameter
Transmitter
Gbps-10.3125-Signaling speed per lane (100GbE)
171Copyright © 2019, Juniper Networks, Inc.
Chapter 6: BTI7800 Series Transceiver Specifications